-- Jun. 30, 2008 -- This Via Technologies motherboard uses its tiny 3.9 x 2.8 inch pico-ITX format, and is available with a 1GHz C7 or 500MHz Eden ULV processor. The P700 boasts an onboard DC-DC adapter, and comes with two daughterboards that add real-world I/O connectors.
The new Epia P700 pico-ITX is available with the 1GHz Via C7 processor as the Via Epia P700-10L, or with the fanless 500MHz Eden ULV as the Epia P700-05LE. Both models include an integrated power adapter, enabling them to accept 12VDC power directly -- and even power 5V SATA drives -- without an external power daughterboard. Compared to the older pico-ITX products, other improvements include gigabit Ethernet, and bundled companion boards with real-world connectors.
The Epia P700 pico-ITX comes with P700-A and P700-B "companion boards" that fit atop the linear pin headers located at the left and right of the main board, as seen below. The P700-A provides an RJ45 connector for gigabit Ethernet, a VGA port, and a COM port, while P-700B sports four USB ports and three audio jacks. Other connectors on the Epia P700 include a 44-pin IDE connector, and a SATA connector.
Securely mounted, the P700's daughterboards can effectively be considered part of the main board. However, they do approximately double its width (overall system dimensions were not cited by Via). Alternatively, for installations where a small footprint is more important than overall system height, the companion boards could be mounted below the main board, given suitable cabling and mounting brackets.
As mentioned, the Epia P700 pico-ITX is offered with a choice of CPUs, both supported by Via's VX700, a core-logic chip that integrates the company's VN800 northbridge and VT8237 southbridge functionality. Graphics capabilities include 2D/3D graphics acceleration, MPEG2 support, and dual monitor outputs. Meanwhile, a single SODIMM socket accommodates up to 1GB of DDR2 533 SDRAM memory.
Via lists the following key features and specifications for the Epia P700 pico-ITX board:
Via Eden ULV 500 clocked at 500MHz or 1.0GHz Via C7
Via VX700 Unified Digital Media IGP chipset
Memory -- DDR2 533MHz SODIMM socket for up to 1GB memory
Display -- integrated Via UniChrome Pro II 3D/2D AGP graphics with MPEG-2/4 and WMV9 decoding acceleration
Networking -- Via VT6122 gigabit Ethernet controller
1 x LAN
1 x CRT/DVI
1 x COM
1 x CPU fan connector
1 x audio pin connector for line out, line in, mic in
4 x USB 2.0
1 x PS/2 keyboard/mouse
1 x LVDS
1 x LPC/SM Bus/GPIO
Real-world connectors (on companion boards):
1 x RJ45 gigabit Ethernet
1 x VGA
1 x COM
4 x USB 2.0
3 x 3.5mm audio (line out, line in, mic in)
Dimensions -- 3.9 x 2.8 inches (main board)
Operating temperature -- 0 to 50 deg. C
Dimensions -- 3.9 x 2.8 inches (100 x 72mm)
Power consumption -- "under 13 watts"